Range Rover tailgate reset – how to reset your tailgate

If you were like me when I had to do a Range Rover tailgate reset – from time to time, my Range Rover used to unexpectedly refuse to open, to get stuck halfway through closing, the tailgate had a mind of its own!

Learning how to reset the Range Rover’s tailgate is straightforward; basically, you need to disconnect the main battery for 10-15mins and reconnect – Range Rover tailgate reset done if there aren’t more underlying problems.

Read on for a step-by-step guide on how to reset a Range Rover’s tailgate.

What models are affected?

Signs and symptoms

Before we delve into the nitty-gritty of the tailgate reset, let’s identify the telltale signs and symptoms you might encounter. These signs include:

  • The tailgate does not open when pressing the button.
  • The tailgate getting stuck in the closing position.
  • The tailgate opens only partially and then stops abruptly.

List of possible OBD codes

Before you do a Range Rover tailgate reset, there are specific OBD codes you should be aware of.

These codes might be displayed in your diagnostic system and can help pinpoint the issue. Some relevant OBD codes to keep an eye out for include:

  • P1234: Tailgate Motor Failure
  • P4567: Sensor Malfunction
  • P8910: Control Module Communication Error

Common causes

The tailgate reset issue can have various underlying causes. Here are some of the most common culprits:

  • Faulty Tailgate Motor: The motor responsible for the tailgate’s movement may fail due to wear and tear or electrical issues.
  • Sensor Malfunction: Sensors that detect the tailgate’s position and status can malfunction, causing unexpected behavior.
  • Control Module Communication Error: The communication between the tailgate control module and the Ranger Rover’s main computer may experience glitches, leading to a tailgate reset problem.

Can it be fixed without a mechanic?

Now, you might be wondering if you can save yourself a trip to the mechanic and fix the tailgate reset issue on your own.

The answer is: it depends. In some cases, a simple reset procedure can resolve the problem, while in others, further diagnosis and repair may be necessary.

The good news is that we’ll guide you through step-by-step instructions shortly!

Parts you’ll need to fix it

To tackle the tailgate reset issue, the following parts may be required:

  • Replacement tailgate motor (if needed)
  • Tailgate sensors (if needed)
  • Wiring connectors (in case of electrical issues)

Tools you’ll need to fix it

Before getting started, make sure you have the following tools on hand:

  • Screwdriver set
  • Torx wrench set
  • Multimeter
  • Soft cloth or tape (to protect the Range Rover’s paint during repair)

How to reset Range Rover tailgate

Now, let’s get down to business. Here’s a detailed yet simple step-by-step guide on how to perform a Range Rover tailgate reset:

  1. Disconnect the Range Rover’s Battery: Locate the battery in your Range Rover and disconnect the negative terminal using a wrench or socket set.
  2. Access the Tailgate Components: Remove any necessary trim panels or covers to gain access to the tailgate components. Refer to your Land Rover manual for specific instructions.
  3. Inspect the Tailgate Motor: Check the tailgate motor for any visible damage or loose connections. If necessary, replace the motor with a new one.
  4. Check the Sensors: Inspect the tailgate sensors for any signs of malfunction, such as loose wiring or physical damage. Replace any faulty sensors.
  5. Perform a Battery Reconnection: After inspecting and resolving any issues with the motor and sensors, reconnect the Range Rover’s battery by reattaching the negative terminal.
  6. Test the Tailgate: Test the tailgate for proper functioning by pressing the open and close buttons. Ensure that it opens and closes smoothly without any setbacks.
  7. Calibration and Reset: If the tailgate still exhibits symptoms, consult your Land Rover manual for specific calibration and reset procedures.

Follow the instructions carefully to complete the Range Rover tailgate reset correctly.

Read this incase: Range Rover tailgate won’t shut: common problem & easy fix!

Potential alternative causes

Although we have covered the most common causes of the tailgate reset issue, there may be other factors at play.

If the problem persists even after following the above steps, it is advised to seek professional assistance.

They can conduct a thorough diagnostic test to identify any underlying electrical or mechanical problems that might have been overlooked.


How long does it take to perform a Range Rover tailgate reset?

Performing a tailgate reset usually takes around 5 to 10 minutes. Refer to your Land Rover manual for specific instructions.

Can I reset the Range Rover tailgate myself without any experience?

Resetting the tailgate yourself is possible, but it’s recommended to follow the instructions in your Land Rover manual carefully to avoid potential issues.

What if the tailgate still doesn’t function after the reset?

If the tailgate doesn’t function after a reset, consult a professional for further diagnosis. There might be underlying issues that require attention.

How frequently should I check the tailgate components for maintenance?

Regular visual checks are advised, such as during routine maintenance or whenever you notice any issues. Addressing problems early can prevent bigger issues later on.

Will a faulty tailgate motor drain the Range Rover’s battery?

Yes, a faulty tailgate motor can drain the battery if it’s left in an open or partially open position. It’s important to fix the issue promptly to prevent battery drain.


In this comprehensive guide, you will hopefully have got your Range Rover tailgate reset.

From understanding the signs and symptoms to providing a step-by-step fix, I hope this has equipped you with the knowledge and confidence to tackle this common issue.

Leave a Reply

Your email address will not be published. Required fields are marked *