Range Rover volume not working, no sound or audio: how to fix

As a Range Rover owner, I know how frustrating it can be when something doesn’t work as it should. Recently, I encountered a problem where the volume on my Range Rover’s sound system stopped working altogether.

So, I decided to share my experience and knowledge to help anyone out there who might be dealing with this issue.

What models are affected?

Signs and symptoms

The most obvious sign of the volume not working in your Range Rover is the lack of sound.

Alternatively, you may hear some faint sounds, but it won’t be enough to enjoy listening to your favorite songs.

Often, the volume may also get stuck on a low level even if you turn the volume knob or use the steering wheel controls.

List of possible OBD codes

If your Range Rover volume is not working, you might get an OBD code that could provide insight into what’s causing the issue. However, it’s not a sure thing that there will be an OBD code for this problem.

Here are some of the codes that could potentially show up:

  • P0500- Vehicle Speed Sensor Malfunction
  • U0121– Lost Communication With Anti-lock Brake System (ABS) Control Module
  • U0100– Lost Communication With Engine Control Module

Common causes

There are several common causes of Range Rover volume not working. These include:

  • Blown Fuse: One of the fuses in the sound system could have blown. Often, this can happen if you accidentally overload the system by turning up the volume too high.
  • Faulty Amplifier: The amplifier is the device that increases the strength of the signal coming from the head unit. If the amplifier is faulty, no sound will be produced.
  • Broken Speaker/Subwoofer: If a speaker or subwoofer is broken, no sound may come from it. Sometimes, the sound may be distorted, or the speaker might rattle.
  • Faulty Head Unit: The head unit is the brain of the sound system, and it controls everything. If it malfunctions, nothing will work correctly.

Can it be fixed without a mechanic?

In some cases, Range Rover volume not working can be fixed without a mechanic. For example, if the problem is due to a blown fuse, you can easily replace it yourself.

Similarly, disconnecting the battery’s negative terminal for a few minutes and reconnecting may help reset the sound system. However, if you can’t identify the problem on your own, it’s better to seek the help of a professional mechanic.

Parts you’ll need to fix it

If you do need to replace a part to fix your Range Rover volume problem, here are the parts you may need:

  • Fuses (if one has blown)
  • Replacement amplifier
  • Replacement speaker/subwoofer
  • Replacement head unit

Tools you’ll need to fix it

Here are the essential tools you’ll need to fix the volume on your Range Rover’s sound system:

  • Screwdriver set
  • Multimeter
  • Wiring diagram (if necessary)

How to fix it

If you’ve identified the problem and have the necessary part(s), you can follow these steps to fix your Range Rover volume:

1. Turn off the ignition, disconnect the battery’s negative terminal, and wait for a few minutes to discharge any electrical components.

2. Use a screwdriver to remove the amplifier, speaker/subwoofer, or head unit cover(s) to access the components.

3. Test each component using the multimeter to check for continuity.

4. Once you have identified the faulty component, remove it carefully and replace it with the new one.

5. After the replacement, carefully screw back the parts you removed earlier.

6. Reconnect the battery’s negative terminal, turn on the engine, and test the volume again.

If the problem persists, you may need to seek the help of a mechanic.

Potential alternative causes

While the causes mentioned above are the most common reasons for Range Rover volume not working, there may be some other, less common reasons as well.

These include:

  • Loose or disconnected wiring
  • Software glitches
  • Short circuits or damaged wiring.

If the problem is due to these issues, you may need the help of a professional mechanic to diagnose and fix it.


Here are some frequently asked questions about Range Rover volume not working:

Why is my Range Rover sound system so quiet?

The sound system may be quiet if there’s a volume limit setting in place or if the speakers or subwoofers are not properly connected.

Can I fix my Range Rover sound system myself?

It depends on the nature of the problem. If it’s a minor issue, like a blown fuse, you may be able to fix it yourself. However, if the problem is more complicated, it’s better to seek the help of a professional mechanic.

How much does it cost to fix the Range Rover sound system?

The cost of fixing the sound system depends on the nature of the problem, the extent of the damage, and the parts required. However, fixing minor issues yourself will save you money on mechanic fees.


Range Rover volume not working can be a frustrating issue to deal with, but with some basic knowledge and the right tools, you can fix it yourself in some cases

. Remember to follow all safety precautions before starting any DIY repair work. While there may be some less common causes of the problem, most of the time, it’s due to a blown fuse, a faulty amplifier, broken speakers, or a faulty head unit.

With this guide, you should be able to diagnose and fix the problem without breaking a sweat.

One comment

  1. Hi Gareth, I have a Discovery sport 2.2diesel 2015, There is no sound from the radio or park sensors, if you wriggle the 20amp fuse in the boot the sound comes on for a couple of seconds then go off what do you think the problem could be. Thanks Mark.

Leave a Reply

Your email address will not be published. Required fields are marked *