In this article: Show
If your Range Rover wipers won’t park it’s usually down to worn-out wiper blades, they are more than just an inconvenience; they can be a serious hazard to your Range Rover’s performance. When the edges of your wiper blades become rough and damaged, it doesn’t just impair your visibility in adverse weather conditions.
It also affects the accuracy of the wiper park position sensor, a crucial component in your Range Rover’s wiper system. Understanding the implications of worn wiper blades and taking prompt action to replace them can safeguard your driving experience and enhance overall vehicle safety.
What models are affected?
- Land Rover Defender
- Range Rover Discovery
- Range Rover Evoque
- Range Rover Sport
- Range Rover Velar
- Range Rover Vogue
Signs and symptoms
When you turn off the wipers’ switch, you expect the wipers to stop and park in their designated position at the bottom of the windshield.
However, in the case of the wipers not parking, you’ll notice that the wipers’ blades stop suddenly wherever they are on your windshield.
List of possible OBD codes
The OBD codes that you’ll most likely encounter when dealing with Range Rover wipers that won’t park are:
- B1A82- Windshield wiper park sense circuit short to ground
- B1A81- Windshield wiper park sense circuit short to battery
- B1A76- Windshield wiper park sense circuit open or short to power
- B1A77- Windshield wiper park sense circuit open or short to ground
Several factors can cause Range Rover wipers to malfunction in parking mode.
Below are some of the most common causes:
- Worn-out wiper blades: When your wiper blades are in bad shape and rough on the edges, it can affect the wiper park position sensor’s accuracy.
- Damaged wiper motor: If your wiper motor is damaged, it can affect the wiper park position sensor’s accuracy.
- Wiper park position sensor: The park position sensor controls the proper parking of wiper blades. If it’s faulty, it can lead to improper parking.
- Poor electrical connections: Bad electrical connections between the wiper motor and the park position sensor can contribute to this issue.
Can it be fixed without a mechanic?
Yes! This issue can be fixed without a mechanic if you have some mechanical inclination and experience. The article will show you how.
Parts you’ll need to fix it
Before you start fixing the issue, you need to know what parts you should have on hand. They include:
- Wiper blades
- Wiper park position sensor
- Wiper motor
Tools You’ll Need to Fix It
To fix the issue, you need the following tools:
- Wire cutters/strippers
How to Fix It
Here is a comprehensive step-by-step guide to help you fix the issue:
- Turn off the engine and remove the key from the ignition.
- Lift the hood of your car and locate your wiper motor and wiper blades.
- Inspect the blades to see if they’re worn out, rusted or damaged. If they are, replace them.
- Check your wiper motor for physical damage.
- Using a multimeter, check the voltage going into and coming out of the wiper motor. Make sure it matches the manufacturer’s specifications.
- Check for any obstructions in the wiper transmission system. Remove any debris that could affect its movement.
- Check the wiring system that connects the motor and park position sensor. Use a multimeter to check for continuity. If the wiring system is faulty, repair it.
- Check the park position sensor and make sure it’s not loose or damaged. If it’s damaged or faulty, you should replace it.
- Install a new wiper park position sensor.
- Reconnect the wiring system that connects the sensor and motor.
- Install the new wiper blades onto the wiper arms.
- Test the wipers to make sure they are working correctly.
Potential alternative causes
There are a few additional causes that could lead to your Range Rover wipers not parking.
- Dirty windshield or wiper blades
- A faulty wiper switch
- A damaged wiper parking gear
How much does it cost to fix Range Rover wipers that won’t park?
The cost of fixing Range Rover wipers that won’t park depends on the exact cause of the problem. If it only requires replacing the wiper blades, it will cost around $20 – $40. However, if it requires replacing the wiper park position sensor or motor, it may cost up to $300.
Can I continue driving even if my wipers won’t park?
Technically, you can continue driving even if your wipers won’t park, but it’s not recommended. As a safety feature, wipers are designed to stop in a specific position when you turn them off. If they don’t park correctly, it could affect your visibility and thus lead to an accident.
How often should I replace wiper blades?
It’s recommended that you replace your wiper blades every 6-12 months. However, if you notice any signs of wear or damage, it’s best to replace them immediately.
If you’re experiencing the issue of Range Rover wipers not parking, don’t worry. With the right knowledge and tools, you can fix it yourself.
This article has provided you with all the necessary information to diagnose and repair the issue, including a list of possible OBD codes, common causes, required parts and tools, and a step-by-step guide.
By following these steps, you can get your wipers working accurately again, ensuring your safety and that of others while you drive.
Last updated and verified on 4th September 2023